R201 LITTLE RED

Voltage	120 V	Phase	Single
Amps	18	CFM	200 CFM
Vacuum Pressure	7.2″ Hg	Primary Filter Area	13 sq. ft.
Inlet Connection	2″	Capacity	9 gal
Casters	3″ Non-marking, 2 rear w/brake, 2 front swivel	Power Cable	30′ Yellow cord
Weight	90 lb	Recommended Tool Kit	152025

Optional

28 sq. ft. primary filter

40 sq. ft. HEPA2 or HEPA Maxx filter w/minihelic

Active charcoal filter assembly

Larger caster set, (2) 6″ rear casters w/brake, (2) 6″ front swivel

240 volt, single phase

Modular Oval Construction, designed for flexibility, upgradeable
Our modular oval construction offers the maximum design flexibility for the WNS2220. Changes to the vacuum can easily be made in the field.
i.e.: change motor decks, add HEPA filtration
Oval vs Round
Our industrial vacuums were brilliantly engineered using the Oval Principle. Many other industrial vacuums are constructed using a standard round collection container, adding a filter and a motor. Ruwac’s are constructed with an oval shaped housing. This shape has proven to be the most effective when dealing with fine dust.
Fiberglass Reinforced Compression Cast Composite, fully grounded
Ruwac manufactures all of our machines out of a compression cast composite. This material is put into a press at 900 tons of pressure, ensuring a precise mold every time. The material will not rust, is dent free, and abrasion resistant. We warranty all compression cast components for life, guarantying you a long lasting vacuum. Every vacuum is fully grounded for safety.
Long Life Oversized Dustless filter system, 99.9% @ .5 microns
Every Ruwac Industrial Vacuum is designed for returning only clean air to the work environment. Our oversized standard filter is 99.9% efficient at .5 microns. This unique designed filter allows the operator to pick up fine material in large quantities, maintaining a low filter loading. Our average filter life is 5 to 7 years, (assuming proper maintenance) and carries a warranty of 3 years. The WNS2220 comes standard with a 13 sq. ft. filter.
- HEPA, ULPA & Active Charcoal Filters available
Some applications require even more filtration than our standard .5 microns. For these customers, HEPA, ULPA & Active Charcoal Filters are an available option on all our equipment. With our standard filtration down to .5 microns, you might never change your HEPA Filter!
Lever Actuated Drop-down Dust Pan for easy emptying
What first impresses everyone about the Ruwac vacuum is the easy to empty drop down dustpan. Just lift the lever with your foot, and the dustpan is lowered to the floor. Push the vacuum forward, and the dustpan is easy to reach and empty. To replace the pan, no alignment needed, just push it under the vacuum and step down on the lever.
Tip resistant counter-balanced base, with low level hose inlet
Are you frustrated by your vacuum turning over all the time, either the vacuum weighs little, or it is a top heavy drum top model. With Ruwac’s low inlet and counterbalanced base, the operator can pull the vacuum via the hose without ever tipping the machine over.
Individually cooled bypass motors for motor bearing longevity
The WNS2220 “Little Red industrial vacuum uses only the highest quality dual stage by-pass motors available. These individually cooled motors bring in outside fresh air to cool the motors. Cheaper flow through type motors use the vacuumed air to cool the motors, and if they do not filter well, all that dust goes through the motor too.
Inclusive sound suppression for quiet operation
All of Ruwac’s industrial vacuums offer inclusive sound suppression. For the “Red Line” vacuums sound levels range from 68-78 dBA.
Manual external filter shaker control for easy filter maintenance
With Ruwac’s oversized filters, maintenance is reduced to almost nothing. Each time you empty the dustpan, give the external shaker bar one or two shakes and you are ready to return to dust-free cleaning.
Heavy duty non-marking casters: rear with locking brakes
Ruwac vacuums have large heavy duty non-marking swivel casters on the front and large heavy duty non-marking swivel casters, with brakes on the rear.
They are very durable and stay on!
Cast deflector to knock material out of the air stream
Our cast deflector knocks material out of the air stream so that none of the material you vacuum hits the filter directly. Material hits the deflector and then spins around our oval designed dust pan. This slows the material down even more, so only the finest material ever contacts the filter. This allows you to have much longer vacuum cycles and be more productive because time is not spent cleaning or replacing filters!

General housekeeping
Concrete dust applications
Drywall Industry
Wood Floor Refinishing


RB201 Bagger Vac	SV-R2 Silo	W184	W151EX

152025 2″ Hose and Tool Package	Pre-Separators for extra collection capacity	HEPA Filter	Overhead Cleaning Tool Package